- Home
- ยป
- Our Products
- »
- Bursting Strength Tester
Bursting Strength Tester
Digital Bursting Strength Tester
Minimum Order Quantity: 10 Piece
Product Brochure
Display Type | Analog |
Voltage | 220 V |
Brand | Techplast |
Frequency | 50 Hz |
Accuracy | 0.10 Kg/cm 2 |
Phase | Single Phase |
Bursting Capacity | 40 Kg/cm2 |
Country of Origin | Made in India |
Digital Pouch Brust Tester
Minimum Order Quantity: 01 Piece
Product Brochure
Display Type | Digital |
Voltage | 230 V AC |
Load Capacity | 100 KG ( AS per Customer Requirment) |
Operating Mode | Manual & Automatic. |
Power Supply | 230 V Ac |
Bursting Capacity | 85 Kg |
Core Compression Tester
Product Brochure
Grade | Semi Automatic |
Display Type | Digital |
Voltage | 230 V Ac Single Phase or 440 V Ac , 3 phase |
Material | Mild Steel |
Load Capacity | 20 kg to 5000 kgf |
Voltage (V) | 230 V Ac , Single Phase / 440 V Ac , 3 Phase |
Frequency (Hz) | 50 Hz |
Weight (Kg) | 200 Kg |
Current (A) | 5 Amp |
“TECHPLAST” is Leading Manufacturer of Core Compression Strength Tester.
The Core Compression Tester / Core Collapsing Strength Tester can test the horizontal load bearing strength or crushing force of Paper Tubes and Paper cores used in winding Yarn / Textiles / Paper / Foils / Films / Laminates, etc.
This winding tension of the material being wound, creates a squeezing / crushing force acting radially inwards on the tube / core.
Poor quality cores, collapse inwards under this stress.
Suitable for:
- Flat Crush Test (using flat adoptersISO 11093)
- Radial Crush Test (using curved adopters)
- Load Capacity: 100 kg to 5000 Kg
- Speed: Variable with AC frequency drive.
- Pre-Set Speed: 10 TO 100 mm/min.
- Compression Grip:- 01 Set.
- Minimum Grip Separation:25 mm
- Maximum Grip Separation:700mm
- Microprocessor based load indicator: Accuracy of +/- 0.05% of load indicated
- Newton or Kg. can be selected.
- Load cell I/P – one
- Extension meter: Least count of 1 mm through proximity/encoder switch.
- Over load excess elongation protection provided.
- One pair of grips provided to hold the samples.
- Floor Model
- Paint: Powder Coating
- Power:230 V / 50 Hz &440V Ac/ 3 phase, + N, E.
HDPE Drum Compression Strength Tester
Minimum Order Quantity: 01 Piece
Product Brochure
Display Type | Digital |
Voltage | 440 V AC |
Material | HDPE / LDPE / PP Drum |
Load Capacity | 500 kg to 5000 kgf |
Voltage (V) | 440 v Ac |
Frequency (Hz) | 50 Hz |
Weight (Kg) | 350 Kg |
Current (A) | 3.0 Amp |
Additional Information:
- Production Capacity: AS PER REQUIRMENT
Digital Puncture Resistance Tester
Minimum Order Quantity: 01 Set
Product Brochure
Material | Mild Steel |
Model Name/Number | TECH-PUNCTURE |
Usage/Application | Laboratory |
Display Type | Digital |
Load Capacity | 20 Kg to 5000 Kgf |
Grade | Semi Automatic |
Power Source | 230 V Ac or 440 V Ac / 3 Phase |
Accuracy | 0.1 Kg |
“TECHPLAST” is Leading Manufacturer of All Type puncture Tester. Static puncture / CBR Strength Tester.
Static Puncture Strength Test Fixture for Geotextiles according to ASTM D4833 or ASTM D6241
- Load Capacity: 20 kg to 5000 Kg
- Speed: Variable with AC frequency drive.
- Pre-Set Speed: 10 TO 100 mm/min.
- Minimum Grip Separation:25 mm
- Maximum Grip Separation:700mm
- Puncture grip: - 01 Set.
- Microprocessor based load indicator: Accuracy of +/- 0.05% of load indicated
- Newton or Kg. can be selected.
- Load cell I/P – one
- Extension meter: Least count of 1 mm through proximity/encoder switch.
- Over load excess elongation protection provided.
- One pair of grips provided to hold the samples.
- Floor Model
- Paint: Powder Coating
- Power:230 V / 50 Hz &440V Ac/ 3 phase, + N, E.
Bond Peel Adhesion Tester 180 degree and 90 degree
Product Brochure
Frequency | 50 Hz |
Voltage | 220 V Ac |
Brand | TECHPLAST |
Cable Length | 2 METER |
Case Construction | M.S POWDER COAT |
Connector Type | KUT |
Frequency Range | 0 TO 50 Hz |
Techplast is a leading manufacturer of Peel Adhesion Testers. These testers are essential instruments used in quality control and research laboratories to measure the adhesion strength of tapes, films, labels, and other adhesive products.
Our Peel Adhesion Testers are designed with precision and accuracy to meet international testing standards. They provide a reliable method for evaluating the bond strength between two materials under a controlled environment.
Key features of our Peel Adhesion Testers include:
-
Versatility: Our testers are adaptable to various materials and can perform different types of peel tests, such as 180-degree peel, 90-degree peel, and T-peel tests.
-
Accuracy: We ensure precise measurement of peel adhesion force, offering repeatable and reliable results.
-
Ease of Use: The testers are user-friendly, with intuitive controls and software for data analysis.
-
Customization: We offer customization options to meet specific testing requirements, including different sample sizes and testing speeds.
-
Compliance: Our Peel Adhesion Testers conform to international standards such as ASTM, ISO, and DIN.
Techplast is committed to providing high-quality testing equipment and excellent customer service. Our Peel Adhesion Testers are used across industries like packaging, automotive, electronics, and medical devices to ensure product performance and reliability.